PRB08028
This product is no longer in stock
Warning: Last items in stock!
Availability date: 09/19/2017
By buying this product you can collect up to 409 loyalty points. Your cart will total 409 points that can be converted into a voucher of 3,27 €.
UL 19 30-inch Hydroplane:RTR (PRB08028)
UL 19 30-inch Hydroplane:RTRRecipient :
* Required fields
or Cancel
UL 19 30-inch Hydroplane:RTR
Needed to Complete
You asked for it and now it's here-the ready-to-run Pro Boat® UL-19 30-inch Brushless Hydroplane. Its design is ultra sleek, with no turbine housing or rear spoiler. And boy is it fast-you can cruise up to speeds of 50+ mph on 6S power thanks to the 6 pole water-cooled motor and 120A ESC. A waterproof Spektrum™ 3KG servo lets you take corners at full speed without fear! On top of that, the UL-19, which is built to NAMBA race specifications, comes equipped with all the aluminum running gear you need and a stainless steel turn fin. This is adrenaline-pumping, heart-pounding action you won't soon forget.
Lightweight, durable fiberglass hull with matching canopy and removable vertical fins
Because the hull is lightweight and durable, you can push this hydroplane to max speeds in race condition waters. The canopy, like the hull, is constructed of hand-laid fiberglass. The vertical fins are removable and replaceable. In case of a bad crash, they will simply break away without damaging the hull.
Extreme power from waterproof electronics
The UL-19 uses a Dynamite® water-cooled 120A, 2-6S ESC that can handle more amperage than needed to run the boat with authority and speed. The new 2000Kv 6-Pole motor features a large rotor that greatly increases motor torque.
Stainless steel two-blade propeller
An aggressive boat like the UL-19 deserves an equally aggressive two-blade propeller. The UL-19's propeller lets you take full advantage of the hull's performance. It features a high-pitch, high rake stainless steel propeller that produces a tight thrust cone that results in better propulsion and higher speeds that won't overload the electronics. You'll be able to reach speeds on 4S that could only be reached on 6S by other boats.
Interference-free connection
The included Spektrum DX2E DSMR® 2.4GHz transmitter will provide a clear, precise connection while the hydroplane is on the water.
Aluminum adjustable propeller strut
Use the aluminum adjustable propeller strut to tune the boat to various water conditions, from glass smooth to windy and choppy. The square-bottom propeller strut allows more precise adjustments by acting similar to a trim tab usually found on Deep-V boats.
Aluminum break-away rudder
The aluminum rudder features a break-away design that will safeguard the transom if the hydroplane hits an immovable object on the water or runs ashore.
Stainless steel turn fin
The stainless steel turn fin will keep the boat glued to the water whether you're going straight or full throttle through a turn.
Approximate Assembly Time: | No assembly required |
Beam: | 16 in (406.4mm) |
Boat Type: | Hydroplane |
Completion Level: | Ready-To-Run |
Drive System: | Flex Shaft |
Hull Height: | 6 in (152.4mm) |
Hull Material: | Fiberglass |
Length: | 30 in (762mm) |
Motor Size: | 3650 6 Pole Marine Motor 2000Kv (installed) |
Propeller Size: | 1.7 x 1.6 |
Radio: | DX2E (included) |
Recommended Battery: | (2) 7.4V 5000MAH 2S 50C LiPo, with EC5 connector (sold separately) |
Scale: | 30 inch |
Speed Control: | 120A (installed) |
Steering: | Rudder |
Trimscheme Colors: | Blue and Yellow |
Type: | RTR Hydroplane |
Weight: | 5 lbs (2300g) |
No customer comments for the moment.