Titanium Tail Boom 305mm (12") (SB305) Ver más grande

Titanium Tail Boom 305mm (12") (SB305)

SK-SB305-SV

Titanium Tail Boom 305mm (12) (SB305)

Más detalles

En stock

Al comprar este producto puede obtener hasta 9 puntos de fidelidad. Su carrito totalizará 9 points que se puede(n) transformar en un cupón de descuento de 0,07 €.


9,87 €

Más

SB305 is 12" long (4.95 mm x 305 mm) and generally used for E-flite, Esky (FP and CP2) and similar CP helis.

Note: On most helis, SuperBooms are designed to be glued in place with CA or epoxy in the same manner as the stock tail boom. The longer SB305 boom used with SuperSkids Landing Gear and some light batteries may make it harder to get a good fore/aft balance, especially when used with aftermarket tail housing assemblies.
If you need to trim (shorten) the boom for better weight distribution, be careful not to make it so short that you have main and tail rotor collisions. Trimming the boom in these cases is the customer's responsibility, not ours. SuperBooms are a stand-alone product designed to work on stock helicopters.

Reseñas

No customer comments for the moment.

Escriba una reseña

Titanium Tail Boom 305mm (12") (SB305)

Titanium Tail Boom 305mm (12") (SB305)

Titanium Tail Boom 305mm (12) (SB305)

Escriba una reseña

21 other products in the same category: