Ver más grande

DYNAM SMOOVE FOAM 1600MM w/80A /CARBON PROP W/O TX/RX/BAT

Modelo DYN8969

Este producto ya no está disponible

Al comprar este producto puede obtener hasta 324 puntos de fidelidad. Su carrito totalizará 324 points que se puede(n) transformar en un cupón de descuento de 2,59 €.

Enviar a un amigo
Enviar a un amigo

DYNAM SMOOVE FOAM 1600MM w/80A /CARBON PROP W/O TX/RX/BAT
DYNAM SMOOVE FOAM 1600MM w/80A /CARBON PROP W/O TX/RX/BAT
Destinatario :
Nombre de su amigo ^* :
Dirección de correo electrónico de su amigo ^* :
^* Campos requeridos
o Cancelar
Imprimir

Más

The Dynam Smoove is a beautifully finished 3D airplane constructed of durable EPO foam that will allow you to explore new heights in 3D aerobatics. The streamlined outline of the Smoove is tailor-made to reduce drag for more effective 3D manoeuvres. With a powerful BM5030A-KV400 Brushless Outrunner motor swinging a 16x12 carbon 2-blade prop, the Smoove is sure to give you all the 3D you can handle and then some!

Featuring a lightweight aerobatic airframe finished in a sharp colour scheme plus sporty decal trim sheet with a powerful BM5030A-KV400 Brushless Outrunner motor for the ultimate aerobatic flights!

Spec Check:

Wing Span: 1600 mm / 63in
Total Length: 1660 mm / 65.3in
Wing Area: 48.7 DM2
Weight: 3250g / 114.6oz
Construction: EPO Foam
Fixed Landing Gear
ESC: 80A Brushless with T connector
Propeller: 16x12 carbon 2-Blade Propeller
Motor: BM5030A-KV400 Brushless Outrunner Motor

Required to finish: Minimum 6ch Radio System, 3x 45g digital, 2x 25g digital Servos, 6ch Receiver, 1 x 22.2v (6S) 4500 30C LiPo Battery & Charger