Scorpion HKIII-4025-550KV Motor Brushless (6mm) (HKIII-4025-550KV) Ver más grande

Scorpion HKIII-4025-550KV Motor Brushless (6mm) (HKIII-4025-550KV)


Scorpion HKIII-4025-550KV Motor Brushless (6mm) (HKIII-4025-550KV)

Más detalles

En stock

Advertencia: ¡Últimos artículos en inventario!

Al comprar este producto puede obtener hasta 149 puntos de fidelidad. Su carrito totalizará 149 points que se puede(n) transformar en un cupón de descuento de 1,19 €.

149,67 €


The Scorpion HKIII-4025 Series Motor is designed for using on 600 class helicopters running on 6 to 12-cell Li-Po power. This motor represents the most technologically advanced power source ever offered for a 600 class electric helicopter.

Scorpion Competition Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold Electro-Coated to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are custom manufactured to be able to withstand high temperatures, making a motor that is virtually impossible to burn up in normal use.

Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!

HK Patent No. : HK1141674

China Patent No. : ZL2010 2 0298704.9

Taiwan Patent No. : M399539

German Utility Patent No. : 202012006207.7

U.S Patent No. : Pending

All Others Worldwide Patent : Pending


Stator Diameter40 mm(1.57 in)
Stator Thickness25 mm(0.98 in)
No. of Stator Arms12
Magnet Poles10
Motor Wind6T/7T Delta
Motor Wire22-Strand 0.25mm
Motor Kv550KV RPM/Volt
No-Load Current (IO/10v)1.65 Amps
Motor Resistance (RM)0.023 Ohms
Max Continuous Current65 Amps
Max Continuous Power2850 Watts
Weight354 Grams (10.79 oz)
Outside Diameter49.98 mm (1.97 in)
Shaft Diameter5.98 mm (0.24 in)
Body Length51.8 mm (2.04 in)
Overall Shaft Length83.7 mm (3.30 in)
Max Lipo Cell12s
Peak Current90 Amps (5 seconds)
Peak Continuous Power3900 Watts (5 seconds)
Motor Timing5deg
Drive Frequency8kHz

Included in the Box

1 x Scorpion HKIII-4025-550KV Motor
3 x Female Connectors
3 x Heat Shrink
4 x M3 Screws

Weight including packaging



No customer comments for the moment.

Escriba una reseña

Scorpion HKIII-4025-550KV Motor Brushless (6mm) (HKIII-4025-550KV)

Scorpion HKIII-4025-550KV Motor Brushless (6mm) (HKIII-4025-550KV)

Scorpion HKIII-4025-550KV Motor Brushless (6mm) (HKIII-4025-550KV)

Escriba una reseña

24 other products in the same category: