Protos Carbon 500 FBL - Motor+ESC+Blades+Brain Agrandir l'image

Protos Carbon 500 FBL - Motor+ESC+Blades+Brain

MS-51200

Protos Carbon 500 FBL - Motor+ESC+Blades+Brain

Plus de détails

En stock

Attention : dernières pièces disponibles !

En achetant ce produit vous pouvez gagner jusqu'à 465 points de fidélité. Votre panier totalisera 465 points pouvant être transformé(s) en un bon de réduction de 3,72 €.


465,83 €

Fiche technique

NiveauConfirmé
TypePas Variable
MoteurBrushless
AssemblageARTF (Almost Ready to fly)

En savoir plus

 

Votre boutique modelisme vous propose l'Helicoptère Protos Carbon 500 FBL - Motor+ESC+Blades+Brain

-- Landing gear made in elastomerized nylon ("Gorilla")
-- Brain flybarless system
-- The "plastic" version with frame is made of 2 halves entirely in nylon with carbon fiber and 30% elastomer
-- Since 2008 MSH has been making single-belt transmission helicopters
-- Fastening battery with 3 O-rings at the front of the model
-- SOLD IN PLASTIC OR CARBON CONFIGURATION
-- Low head to get the center of gravity as close as possible to the main rotor
-- The belt transmission requires tension adjustment which changes the distance between the mechanical body and the tail
-- The model can accommodate a large range of servos
-- The tail is quite robust and consistent
-- MSH BY YGE 60A REGULATOR
-- The Carbon version frame is made with two carbon fiber plates spaced apart by 3 technopolymer parts
-- CARBON FIBER FINS

 

 
-- Frame : Two carbon fiber plates (1.5mm) jointed with plastic parts
-- System trasmission (motor - main rotor - tail rotor) : Single belt HTD3mm
-- Main blades : 430mm (include in the kit) up to 470mm (as upgrade)
-- Battery usable : LiPo 4s 3700mAh; LiPo 5s 3300/3700mAh; LiPo 6s 2500mAh/3000mAh
-- Suggested battery : Lipo 5s 3500mAh
-- Main rotor diameter : 965mm (with 430mm main blades)
-- Tail rotor diameter : 192mm
-- Total lenght without blades : 955mm
-- Total lenght with blades 1185mm : (with 430mm main blades)
-- Main shaft diameter : 8mm totally hollow
-- Tail shaft diameter : 5mm
-- Fully height : 270mm
-- Swashplate servos : 3x mini servos
-- Tail servo : 1x standard servo or mini servo
-- Maximum dimension of main blade root : 10mm M3 screw
-- Maximum dimension of tail blade root : 4mm M2.5 screw
-- Teeth pinion : 15T (included in the kit); 16T 17T 18T 19T 20T (as upgrade)
-- Main pulley teeth : 93T
-- Tail pulley teeth : 20T (included in the kit); 18T (as upgrade)
-- Tail boom diameter : 17mm
-- Spindle diameter : 5mm M3 screw
-- Main head construction material : Al 7075 (Ergal)
-- Main shaft construction material Steel : 1000 N/mm2 (Steeltech AG - ETG 100)
-- Plastics Latamid : 66 GF30

 > INCLUDED IN THE KIT

-- Pinion : 15T
-- Tail boom : Aluminium tail boom stretch version (to use with blades up to 470mm)
-- Main blades : Carbon fiber MSH 430mm
-- Tail blades : Plastic 67mm root=4mm
-- Flybarless unit : Brain
-- Motor : MSH by Scropion 3026 800Kv n° magnets = 10
-- Regulator : MSH by YGE 60A

 > REGULATOR TECHNICAL SPECIFICATIONS

-- Max current : 60A continuous
-- Battery : from 2s to 6s
-- Governor-Mode : Yes
-- Soft start : Yes (soft-medium-hard)
-- Clock frequency : From 8 to 16 kHz
-- BEC : Yes. Switched BEC 5.5V, 3A continuous , peak 5A
-- Overtemperature or overload warning : Yes
-- Anti spark system during battery connection : Yes
-- Weight : 40g (witch cables)
-- Programming : With program card II + III (as upgrade)

Avis

No customer comments for the moment.

Donnez votre avis

Protos Carbon 500 FBL - Motor+ESC+Blades+Brain

Protos Carbon 500 FBL - Motor+ESC+Blades+Brain

Protos Carbon 500 FBL - Motor+ESC+Blades+Brain

Donnez votre avis

15 other products in the same category: