22 3.0 SPEC-Racer MM Race Kit: 1/10 2WD Buggy (TLR03010) Agrandir l'image

22 3.0 SPEC-Racer MM Race Kit: 1/10 2WD Buggy (TLR03010)

TLR03010

22 3.0 SPEC-Racer MM Race Kit: 1/10 2WD Buggy

Plus de détails

Ce produit n'est plus en stock

En achetant ce produit vous pouvez gagner jusqu'à 370 points de fidélité. Votre panier totalisera 370 points pouvant être transformé(s) en un bon de réduction de 2,96 €.


370,49 €

En savoir plus

22 3.0 SPEC-Racer MM Race Kit: 1/10 2WD Buggy

Key Features

  • Based on the championship-winning 22 3.0 buggy
  • Track-ready weight of less than 1499 grams with full-size short, standard Orion electronics and 2.2” tires
  • Lightened 7075-T6 aluminum chassis
  • Ball diff with aluminum hubs and composite outdrives
  • Aluminum drive shafts with lightened axles
  • Lightweight motor plate with polycarbonate gear cover
  • 3-gear transmission for quicker acceleration
  • Ultra lightweight 0.5mm polycarbonate body
  • VLA front suspension geometry
  • Aluminum front axles
  • Gen II 12mm big-bore shocks
  • Transverse battery mounting option
  • Many popular option parts included as standard

Needed To Complete

  • Motor
  • Electronic Speed Control
  • Servo
  • Tires
  • Radio System
  • 48 Pitch Pinion Gear
  • Charger
  • Battery

Overview

The award-winning 22 3.0 buggy has set the standard for peak performance in modified 2WD racing. The 22 3.0 SPEC-Racer kit does the exact same thing for the spec class. Every part has been examined and, where necessary, optimized to give you a spec racer that can dominate the competition, right out of the box.

Weighs in Under 1499 Grams

No expensive aftermarket parts are required to meet the minimum ROAR weight. Extra pockets milled into the chassis, along an assortment of lightweight parts, allow the 22™ 3.0 SPEC-Racer to be built using kit hardware and still weigh in under 1499 grams with all electronics installed. This gives racers the freedom to meet the ROAR minimum by using bigger, more powerful batteries or strategically adding ballast to maximize performance.

Lightweight Drivetrain

Major weight savings in the drivetrain let racers extract more effective torque and top speed from stock motors. The innovative ball differential, with its aluminum hub and composite outdrives, is 12.7g lighter than the stock diff. The TLR® Direct Drive System weighs 9.3g less than a slipper assembly, and the aluminum driveshafts with lightened axles are 7.8g lighter than the stock steel CVAs. It all adds up to 29.8 grams of weight saved in the drivetrain alone.

Ultra Lightweight Body

The included body has the same cab-forward lines as the original 22 3.0 body but is made of lighter 0.5mm polycarbonate. This gives the buggy all the aerodynamic benefits of the original while saving over 20 grams of weight and lowering roll center at the same time.

Lightweight Motor Plate

A smaller motor plate designed specifically for the smaller spur gear sizes used in Spec-Class racing is included. It is CNC machined from 7075-T6 aluminum and paired with a polycarbonate gear cover to give racers the lightest and tidiest motor plate setup available.

Proven 22 3.0 Platform Features

The real genius in the 22 3.0 SPEC-Racer’s design is that team engineers were able to shave weight without sacrificing any of the most important features that make the standard 22 3.0 buggy such a dominating force in its class. These include the VLA front suspension geometry, revised motor location, transverse battery mounting, 2mm wider rear pivot, revised rear shock locations and more.

Specs

Approximate Assembly Time:3-5 Hours
Ball Bearings:Full Rubber Seal Ball Bearings
Body:22 3.0 Ultra Light Weight (0.5mm) Cab Forward, with optional Rear Fin
Brakes:Controlled via Motor/ESC
Chassis:2.5mm Milled Plate, 7075-T6 Aluminum
Completion Level:Kit
Differential:Multi-Material Ball Differential
Drivetrain:2WD
Front Track:9.8 in (248.5mm)
Gear Pitch:48-Pitch
Height:5.8 in (148mm)
Internal Gear Ratio:2.43:1
Length:15 in (382mm)
Rear Track:9.8 in (250mm)
Shock Type:12mm Big Bore, Oil Filled
Size/Scale:1/10
Spur Gear:69T
Suspension:Lower A-Arm, Upper Adjustable Link
Track:9.8 in (250mm)
Vehicle Type:Buggy
Weight:52.4 oz (1485g) (track ready)
Wheel Diameter:2.2 in (56mm)
Wheel Type:22 Dish
Wheelbase:11.0 in (280mm)
Width:9.8 in (250mm)

Avis

No customer comments for the moment.

Donnez votre avis

22 3.0 SPEC-Racer MM Race Kit: 1/10 2WD Buggy (TLR03010)

22 3.0 SPEC-Racer MM Race Kit: 1/10 2WD Buggy (TLR03010)

22 3.0 SPEC-Racer MM Race Kit: 1/10 2WD Buggy

Donnez votre avis

17 other products in the same category: