Modellismo RC Elicoterro,Droni, FPV, Aero, Auto e Barca
Nessun prodotto
I prezzi sono IVA inclusa
Prodotto aggiunto al tuo carrello
Ci sono 0 articoli nel tuo carrello. Il tuo carrello contiene un oggetto.
Visualizza ingrandito 
K&N DBXL: 1/5 4wd Buggy RTR (LOS05010)
LOS05010
Questo prodotto non è più disponibile
Con l'acquisto di questo prodotto è possibile raccogliere fino a 1023 Punti fedeltà. Il totale del tuo carrello 1023 points può essere convertito in un buono di 8,18 €.
Dettagli
K&N DBXL: 1/5 4wd Buggy RTR
Key Features
- Genuine K&N air filter included
- Increased air flow for increased engine performance
- Full 4WD capabilities
- Pull start 23cc gasoline engine
- Machined ring and pinion gear
- 740cc gas tankr
- Roll Cage protects chassis and can be removed by taking of only 10 body clips
- 24mm Hex Standard Hex size in 1/5th scale vehicles. Allows for use of multiple tire and wheel combinations
- Integrated adjustable servo saver
- 4mm aluminum chassis
- Dual disk brakes
- Sealed differentials
- Spektrum™ DX2E 2.4GHz radio system included
Needed To Complete
- 87-93 Octane Gasoline
- 2-Cycle Oil
- Gas Can
- Battery Charger
Overview
Stand out from the crowd and push the limits of RC performance with the Losi® K&N 1/5-Scale Desert Buggy XL. This edition of the hard-hitting Losi Desert Buggy XL comes prepared to take names with an officially licensed K&N body on the outside and genuine K&N air filter inside. The Desert Buggy XL was designed to withstand the rigors of intense off-road driving with a terrain-killing 4WD drivetrain, injection molded roll cage, and 4mm aluminum chassis. Under the hood drivers will find a 23cc gasoline engine that’s sure to make your presence known and a gas tank that delivers over 40 minutes of relentless action on a full tank.
| Approximate Assembly Time: | Less than 1 Hour |
| Ball Bearings: | Full Ball Bearing Drivetrain |
| Batteries: | Dynamite 1700 mAh receiver pack |
| Body: | Panels, Silkscreened |
| Brakes: | Dual Disc Brakes |
| Chassis: | 4mm Plate, 6061-T6 Aluminum |
| Completion Level: | Ready-To-Run |
| Differential: | Bevel Gear, sealed |
| Drivetrain: | 4WD |
| Engine Size: | Pull start 23cc gasoline |
| Final Drive Ratio: | 10.09:1 |
| Fuel Tank Capacity: | 740cc |
| Ground Clearance: | 3.1 in (78.7 mm) |
| Height: | 12.25 in (311.1 mm) |
| Internal Gear Ratio: | 3.31:1 |
| Length: | 30.75 in (781 mm) |
| Pinion: | 20T |
| Radio: | DX2E, 2 channel |
| Servos: | Installed 30 kg Servo |
| Shock Type: | Oil-Filled, Coil-Over Springs |
| Size/Scale: | 1/5 |
| Spur Gear: | 61T |
| Suspension: | Independent |
| Tire Diameter: | 7.8 in (198.1mm) |
| Tire Tread: | All-Terrain |
| Vehicle Type: | 4WD RTR Off-Road Gas Buggy |
| Weight: | 28.7 lb (13.01 kg) |
| Wheel Diameter: | 4.75 in (120.65mm) |
| Wheel Hex Size: | 24mm Hex |
| Wheel Width: | 2.34 in (59.43mm) |
| Wheelbase: | 22.0 (558.8 mm) |
| Width: | 19.1 in (485.1 mm) |
Recensioni
No customer comments for the moment.
