View larger

Protos Carbon 500 FBL - Motor+ESC+Blades+Brain

Model MS-51200

En stock

Warning: Last items in stock!

Sammeln Sie mit dem Kauf dieses Artikels bis zu 559 Treuepunkte. Ihr Warenkorb hat insgesamt 559 points die umgewandelt werden können in einen Gutschein im Wert von 4,47 €.

An einen Freund senden
An einen Freund senden

Protos Carbon 500 FBL - Motor+ESC+Blades+Brain
Protos Carbon 500 FBL - Motor+ESC+Blades+Brain
Empfänger :
Name Ihrer/es Freundin/es ^* :
E-Mailadresse Ihres Freundes ^* :
^* Pflichtfelder
oder Abbrechen
Print

Data sheet

Niveau	Confirmé
Type	Pas Variable
Moteur	Brushless
Assemblage	ARTF (Almost Ready to fly)

More info

Votre boutique modelisme vous propose l'Helicoptère Protos Carbon 500 FBL - Motor+ESC+Blades+Brain

-- Landing gear made in elastomerized nylon ("Gorilla")
-- Brain flybarless system
-- The "plastic" version with frame is made of 2 halves entirely in nylon with carbon fiber and 30% elastomer
-- Since 2008 MSH has been making single-belt transmission helicopters
-- Fastening battery with 3 O-rings at the front of the model
-- SOLD IN PLASTIC OR CARBON CONFIGURATION
-- Low head to get the center of gravity as close as possible to the main rotor
-- The belt transmission requires tension adjustment which changes the distance between the mechanical body and the tail
-- The model can accommodate a large range of servos
-- The tail is quite robust and consistent
-- MSH BY YGE 60A REGULATOR
-- The Carbon version frame is made with two carbon fiber plates spaced apart by 3 technopolymer parts
-- CARBON FIBER FINS

-- Frame : Two carbon fiber plates (1.5mm) jointed with plastic parts
-- System trasmission (motor - main rotor - tail rotor) : Single belt HTD3mm
-- Main blades : 430mm (include in the kit) up to 470mm (as upgrade)
-- Battery usable : LiPo 4s 3700mAh; LiPo 5s 3300/3700mAh; LiPo 6s 2500mAh/3000mAh
-- Suggested battery : Lipo 5s 3500mAh
-- Main rotor diameter : 965mm (with 430mm main blades)
-- Tail rotor diameter : 192mm
-- Total lenght without blades : 955mm
-- Total lenght with blades 1185mm : (with 430mm main blades)
-- Main shaft diameter : 8mm totally hollow
-- Tail shaft diameter : 5mm
-- Fully height : 270mm
-- Swashplate servos : 3x mini servos
-- Tail servo : 1x standard servo or mini servo
-- Maximum dimension of main blade root : 10mm M3 screw
-- Maximum dimension of tail blade root : 4mm M2.5 screw
-- Teeth pinion : 15T (included in the kit); 16T 17T 18T 19T 20T (as upgrade)
-- Main pulley teeth : 93T
-- Tail pulley teeth : 20T (included in the kit); 18T (as upgrade)
-- Tail boom diameter : 17mm
-- Spindle diameter : 5mm M3 screw
-- Main head construction material : Al 7075 (Ergal)
-- Main shaft construction material Steel : 1000 N/mm2 (Steeltech AG - ETG 100)
-- Plastics Latamid : 66 GF30

> INCLUDED IN THE KIT

-- Pinion : 15T
-- Tail boom : Aluminium tail boom stretch version (to use with blades up to 470mm)
-- Main blades : Carbon fiber MSH 430mm
-- Tail blades : Plastic 67mm root=4mm
-- Flybarless unit : Brain
-- Motor : MSH by Scropion 3026 800Kv n° magnets = 10
-- Regulator : MSH by YGE 60A

> REGULATOR TECHNICAL SPECIFICATIONS

-- Max current : 60A continuous
-- Battery : from 2s to 6s
-- Governor-Mode : Yes
-- Soft start : Yes (soft-medium-hard)
-- Clock frequency : From 8 to 16 kHz
-- BEC : Yes. Switched BEC 5.5V, 3A continuous , peak 5A
-- Overtemperature or overload warning : Yes
-- Anti spark system during battery connection : Yes
-- Weight : 40g (witch cables)
-- Programming : With program card II + III (as upgrade)