As standard the Hammer comes with a 2.4Ghz wheel type controller, a high precision 540 motor, waterproof speed controller and 7.2V 1800mah Tamiya type rechargeable battery pack. This setup gives more than enough power and speed for any serious racer but if you are the kind of person that likes to take things to the extreme then you can upgrade your model with a brushless kit. With the brushless motor, ESC and Li-po battery the truck will go even quicker and will take some real skill to control. You can add these upgrades above but please note they will not come fitted so you will need to fit yourself. The upgrade kit contains 1 x high power brushless motor, 1 x brushless ESC, 1 x 11.1V 2200mah LiPo battery and 1 x LiPo battery charger.   1:10th SCALE MODELThis 1:10th scale truck measures in at 400mm x 300mm x 160mm (length, width, height)   WATERPROOF SERVO, ESC & RECEIVERThis model has a waterproof servo, ESC and receiver to help protect the model if you hit a puddle or are racing on a wet track.   POWERFUL RC540 MOTOR WITH ANODIZED ALUMINIUM HEAT SINKA fast RC540 motor with aluminium heat sink to keep it cool and operating at its peak. The motor is connected to an electronic speed control that gives full proportional speed both in forward and reverse.   OIL FILLED SHOCKSThe angle of the aluminium capped shocks can be adjusted to suit your driving preference and terrain. They are mounted using ball joints to give a little flexibility. Each wheel has two shocks to give the extra suspension needed on a monster truck.   ALUMINIUM CENTRAL DRIVE SHAFTThis model comes with a strong aluminium central drive shaft that transfers the power from the rear to the front for the 4WD system.   ANTI-SKID TYRESSpecially treaded tyres give lots of grip off road and good speed on road.   4 WHEEL DRIVE WITH DIFFERENTIALSThis model has a 4 wheel drive system for better performance off road and also improved grip when cornering. The truck also features working front and rear differentials that further greatly improve handling and performance.   ALL NEW 2.4GHz RADIO TRANSMITTERAll new 2.4GHz radio technology is used. This is more reliable than the old FM equipment and allows mulitiple RC cars to be used in the same area without interference. SPRING LOADED FRONT AND REAR BUMPERSThis model comes fitted with spring loaded front and back bumpers that can help to avoid damage in the event of a crash.



Features:


Waterproof servo and receiver Aluminium centre drive shaft Double shocks on each wheel Powerful motor system Large solid shock towers High performance front/rear diffs Long travel suspension Aluminium radio tray Eight oil filled aluminium capped shocks Anti-skid tyres and chrome plated rims Spring loaded tough bumper 4WD



Specifications:


Length: 400mm Height: 160mm Width: 300mm Wheelbase: 275mm Gear Ratio 1 Speed: 11:1 Ground Clearance: 30mm Weight: 1530g Tyres: 60mm width 120mm diameter Radio: Wheel type Motor : RC 540 ESC: HSP 03018 Battery: 7.2V 2000mah